Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
تفاصيل التعبئة والتغليف: صندوق كرتون
إنتاجية: 1000000000 pcs/week
نقل: Ocean,Land,Air
مكان المنشأ: الصين
الدعم: 7000000000 pcs/week
الشهادات: GB/T19001-2008/ISO9001:2008
رمز النظام المنسق: 8541401000
ميناء: SHENZHEN
الدفع نوع: T/T,Paypal
إنكوترم: FOB,EXW,FCA
نموذج: 3015FIRC-85L14I100
علامة تجارية: أفضل أدى
نوع التوريد: المصنع الأصلي
المواد المرجعية: ورقة البيانات
مكان المنشأ: الصين
محيط: يؤدى
نوع الحزمة: سطح جبل
LED Packaging Type: Top
Beam Angle: 120°
Base Material: Copper
Size Of SMD LED: 3.0X1.55mm (±0.05)
Polarity: Indentation Is The Cathode
Inner Packing: Anti-static Bag
Certification: RoHs
Emitting Color: Infrared LED
Chip Material: AIGaAs
Wavelength: 850nm(±10nm)
Voltage: 1.3-2.0V
بيع الوحدات: | Piece/Pieces |
---|---|
نوع الحزمة: | صندوق كرتون |
Is 850nm Infrared LED?
قطعا نعم. We can name all the LED that wavelengt over than 700nm. 850nm LED can be widely use in kinds of hunting camera, security camera or some security control system. Which can offer the best light during it's working. Compare with 940nm LED. Both of them are IR LED, but 850nm LED will got brighter slight red spot than 940nm LED when it's working. In this case, the concealment of 850nm IR LED might not be as goods as 940nm, but it did work better in the lighting for night vision camera. In this 3015FIRC-85L14I100, we produce 850nm as side emitting LED, which can emits the radiation and light from the side. If you need this side view 850nm LED for your project, just feel free to contact us for more detail~
850nm infrared LED 3014 Side View Standard LED Size:
* Yellow LED, IR LED, UV LED, Blue SMD LED ect are also available in this SMD LED case*
Electrical Parameters:
Parameter |
Symbol |
Rating |
Unit |
Power Dissipation |
Pd |
200 |
mw |
Pulse Forward Current |
IFP |
1000 |
mA |
Forward voltage |
IF |
≤150 |
mA |
Reverse Voltage |
VR |
5 |
V |
Junction Temperature |
Tj |
100 |
℃ |
Operating Temperature |
Topr |
-40 - +80 |
℃ |
Storage Temperature |
Tstg |
-40 - +100 |
℃ |
Soldering Temperature |
Tsol |
240 |
℃ |
Electro-Stati-Discharge(HBM) |
ESD |
2000 |
V |
Service lige under normal conditions |
Time |
60000 |
H |
Warranty |
Time |
2 |
Years |
Antistatic bag |
Piece |
2000 |
Bag |
*Pulse forward current confition: Duty 1% and Pulse width=10us.
*Soldering confition: Soldering confition must be completed with 3 secongds at 260℃
Parameter |
Symbol |
Min |
Type |
Max |
Unit |
Test Condition |
Forward Voltage |
VF |
1.3 1.5 1.6 |
1.4 1.6 1.7 |
1.7 1.8 2.0 |
V |
IF=20mA IF=50mA IF=100mA |
Total Radiated Power |
PO |
|
25 |
|
mW |
IF=50mA |
Radiant Intensity |
IE |
15 25 |
5
|
10 22 40 |
mw/sr |
IF=20mA IF=50mA IF=100mA |
Peak Wavelength |
λp |
845 855 865 |
nm |
IF=50mA |
||
Half Width |
λ△ |
|
50 |
|
nm |
IF=20mA |
Viewing Half Angle |
2θ1/2 |
|
120 |
|
deg |
IF=20mA |
Reverse Current |
IR |
|
|
5 |
uA |
VR=5V |
*Luminous intensity is measured by ZWL600.
*λD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
احتياطات التعامل:
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.
4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;
4-BA plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.
4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;
4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.
5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.
6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.
رقم الهاتف : 86-0755-89752405
المحمول: +8615815584344
الالكتروني: amywu@byt-light.comعنوان الشركة: Building No. 1 Lane 1 Liuwu Nanlian The Fifth Industry Area , Longgang, Shenzhen, Guangdong China
الموقع: http://ar.bestsmd.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.